Skip to navigation

ST — Slope Transition

  • Used to create immediate 1/4 ” on 12” slope on horizontal runs when required by local code
  • Typically used in pairs (one at lower (inlet) end, other at upper (outlet) end of sloped [ 1/4  on 12] horizontal run)
  • Not required by UL certification or AMPCO, but may be required in some jurisdictional areas
  • 304/ALum, 316/Alum, 304/304, 316/316

Orderd Part Includes:

Slope Transition, plus one VB and one CB.

Notes:1.  K Factors =  (use same formula as Straight Pipe Lengths  for approximate K factor)